Mounting Instructions
Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29,
Autronica Fire and Security
Page 63
9.7 Removing the Protector from the Base
Before removing a protector from a base, observe the aligment
marks to determine whether it is locked or not to the base (see
chapter 9.4).
To remove a protector that is not locked:
Simply grab the rotatable bayonet ring and turn it counter-
clockwise, then remove the protector from the base
To remove a protector that has been locked with the locking tool:
Grab the rotatable bayonet ring, insert and press the locking tool
into the small slot
Turn the bayonet ring counter-clockwise, and remove the
protector from the base
9.8 Retrofit mounting onto Existing AutroSafe Base
BWA-100/BWA-101
Autronica provides several different variants of protectors specifically
intended for retrofit purposes (AutroGuard® Retro). These protectors
can easily be mounted onto an existing AutroSafe base
(BWA-100/BWA-101) similar to chapter 9.5. For dimensions, see
chapter 3.7.4.
Remove the existing detector from the base
Insert the retrofit protector onto the base, then turn the
protector (the bajonet ring is not rotatable on retrofit protectors)
clockwise until it is properly fastened
AutroSafe detector base
BWA-100/BWA-101
Protector for retrofit on
AutroSafe bases
BWA-100/BWA-101
