P.8
User Guide
Note2: If the pre-programmed run-time expires or if the user shuts down the engine by remote
control, the vehicle will enter Ready Mode.
Caution!!! Do not leave children or pets unattended in a vehicle standing in Idle Mode.
Valet
Mode
When the vehicle is in Valet Mode, the remote starter and alarm functionalities are disabled. If the
vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from
being remote-started accidentally.
Any of the following features will put your remote car starter into Valet Mode:
Ignition Valet: This feature allows you to put your system into Valet Mode by
using the ignition key.
Remote valet: This feature allows you to put your system into Valet Mode by
using
the
transmitter.
To
put
the
system
intoValet
Mode
To put the system into Valet mode using the KEY (Ignition Valet Mode):
1.
Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
2.
The parking lights will flash three times.
3.
Turn the ignition OFF.
4.
The LED on the antenna will come ON solid to indicate that the vehicle has successfully
entered Valet mode.
To put the system into Valet mode using the TRANSMITTER (Remote Valet Mode):
1.
Press and hold the
and buttons simultaneously until the remote beeps once,
pause, then beeps once again. Release the buttons.
2.
The
and
buttons will flash 3 times.
3.
The LED on the antenna will come ON solid to indicate that the vehicle has successfully
entered Valet mode.
To
put
the
system
out
of
Valet
Mode
To put the system out of Valet mode using the KEY (Ignition Valet Mode):
1.
Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
2.
The parking lights will flash twice.
3.
Turn the ignition OFF.
4.
The LED on the antenna will flash quickly to indicate that the vehicle is now out of Valet
mode.
To put the system out of Valet mode using the TRANSMITTER (Remote Valet Mode):
1.
Press and hold the
and buttons simultaneously until the remote beeps once,
pause, then beeps once again. Release the buttons.
2.
The
and
button will flash 3 times.
3.
The LED on the antenna will flash quickly to indicate that the vehicle is now out of Valet
mode.
The system will warn you if someone attempts to remote start the vehicle while in Valet Mode:
The parking lights will:
Turn ON then OFF; then flash twice.
