Autostart As2373twv User Manual Download Page 5

User Guide

 P.5

 

Arming/disarming

 

the

 

Starter

 

Kill

 

This added security feature will prevent the vehicle from starting with the Ignition key when the 
starter kill is armed. If the system was installed with the starter kill option, you will not be able to 
start the vehicle with the key unless the system has been unlocked first or put into Valet Mode 
(page-8) 

Note: If the Starter Kill is installed, the vehicle will benefit from a protection against starter 
motor damage that could occur after remote-starting the engine should the user, by force of 
habit, turn the ignition key to the CRANK position. 

The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm 
automatically) or Active Mode (so as to require the user’s intervention for arming). By default, your 
Remote Car Starter is configured to Passive Mode.  
Passive mode: 
To arm the Starter Kill, press the 

 button on the transmitter, OR 

1.

 

In  Passive Mode, the Starter Kill will automatically arm 1 minute (by default) or 3 
minutes (if configured this way) after the ignition is turned OFF or once the last door is 
closed (if the doors are monitored).  

2.

 

The LED on the antenna will flash quickly during the countdown preceding the activation 
of the Starter Kill. 

3.

 

Once the activation countdown expires, the LED will send a series of quick double 
flashes to indicate that the Starter Kill is now armed. 

To disarm the Starter Kill, press the 

 button on the transmitter. 

 

The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if 
configured this way) if no door is left opened (if the doors are monitored) and the ignition 
is not turned ON. 

 
Active Mode: 
To arm the Starter Kill, press the 

 button on the transmitter. 

1.

 

The parking lights will flash once.  

2.

 

The LED on the antenna will flash slowly. 

3.

 

If remote door locks are installed, this will also lock the doors and arm the OEM-style 
alarm. 

To disarm the Starter Kill, press the 

 button on the transmitter. 

1.

 

The parking lights will flash twice.  

2.

 

The LED on the antenna will remain OFF. 

3.

 

If remote door locks are installed, this will also unlock the doors. 

Summary of Contents for As2373twv

















Reviews: