8
HARNESS DESCRIPTION
7-PIN HARNESS
9 PIN HARNESS
PIN #
COLOR
FUNCTION
DESCRIPTION (Connect to...)
8 ORANGE
DOME
LIGHT IN (+)
Connect to vehicles dome light wire that has +12-volts with the doors
open.
NOTE Only one of the door trigger input must be used per
application.
9 GREY DOME
LIGHT IN (-)
Connect to vehicles dome light wire that has GROUND with the doors
open.
NOTE Only one of the door trigger input must be used per
application.
10 EMPTY GROUND-
OUT
Negative output when running (Pulsed or Constant) Used for clutch
bypass or aux relay.
11 WHITE/
YELLOW
STARTER
KILL OUT (-)
Armed output for starter kill option - *see installation diagram
12
EMPTY
REARM
Gives a 1 second pulse 4 seconds after remote starter shut down
13 EMPTY EXTERNAL
TRIGGER (-)
Used to trigger remote starter from an external receiver's output (option
must be programmed)
14 BLUE PARKING
BRAKE IN (-)
Connect to wire at PARKING brake switch that has ground with
Parking brake engaged.
15
BROWN
LOCK (-)
Gives a negative pulse when locking. For pulse duration see MODE 1
FUNCTION 3
16
GREEN
UNLOCK (-)
Gives a negative pulse when unlocking For pulse duration see MODE 1
FUNCTION 3
17
BLUE
TRUNK out(-) 1 sec pulse output on pin #15, when channel 3 is remotely activated.
MAIN 5 PIN HARNESS (14awg)
PIN #
COLOR
POLARITY
DESCRIPTION (Connect to...)
A
RED
+12V BATTERY
Constant 12 volts *
B
YELLOW
IGNITION OUT
Ignition - 12-volts during "RUN" and "START"
C VIOLET STARTER
OUT
Starter
- 12 volts during crank only
D ORANGE
ACCESSORIES
OUT
Accessories - 12 volts during "RUN" only
E
RED
+12V BATTERY
Constant 12 volts *
•
NOTE:
Constant 12-volts wires must be connected to heaviest gauge 12-volt wires at ignition
switch. When there are two constant 12-volt wires at ignition switch wires A and E must be
separated (each to their own 12-volts source). When there is only one 12-volt source at ignition
switch then and only then can they be connected together.
PIN #
COLOR
FUNCTION
DESCRIPTION (connect to...)
1 BLACK
CHASSIS
GROUND
Ground (to chassis)
2
VIOLET
COIL (-) Tach
Vehicle's Tach wire (coil -)
3 GRAY
HOOD
PIN
SWITCH (-)
Hood switch - grounded when hood open
4
N / A
GLOW-PLUG (+)
5 ORANGE BRAKE
SWITCH
INPUT
Brake switch - 12-vollt when brake pedal pressed
6
RED
VALET (+)
One side of toggle switch - other side of toggle switch to
constant 12 volts
7 YELLOW
PARKING
LIGHTS
12-vollt Parking light output
