4
6. Now you can increase or decrease the Tach
settings, depending on your needs.
7. LOCK will decrease the setting and START
will increase the setting.
8. After proper setting has been reached, press
TRUNK to save setting. (Parking lights should
flash once long)
CUSTOM PROGRAMMING OPTIONS
Engine starter systems are equipped with 2 custom
programming menus that allow the user to custom
fit the system according to the installation
requirements.
These options are designed to help make
interfacing with all vehicles possible.
To get into custom programming mode you
must do the following:
1. Hold pin switch down for 6 sec.
2. Release pin switch (Hood switch). Parking
lights will turn ON.
3. Immediately press and release pin switch once
again. (Parking lights will stay ON for 20 sec.)
4.
Press and hold brakes, and press LOCK or
START on remote transmitter. (
LOCK for
mode one, and START for mode two)
Parking
lights will flash once for Mode 1 and twice for
Mode 2.
After you have entered into one of the two
programming menus you can release the brake
pedal. The unit will stay in programming mode
until the hood pin switch is pressed or the Valet
switch has been turned OFF.
(So take your time to
make the proper selection)
The menu will automatically start you at function
one, once you choose from one of the three
Options; you will automatically jump to the next
function.
To select one of the three options press the
appropriate transmitter buttons. (See below)
1. LOCK = Option 1
2. START= Option 2
3. TRUNK = Option 3
Note: CH1&CH2={CH3=TRUNK} and
CH2=START in 2-Button remote.
Once an option has been selected the Parking lights
will flash 1,2 or 3 times. (
Depending on option
selected)
MODE 1
*INDICATES DEFAULT SETTING
FUNCTION 1
OPTION 1*
Ignition Lock ON.
OPTION 2
Ignition Lock OFF.
OPTION 3
Ignition Lock ON and Locks
in
TOGGLE MODE
*
*DOOR LOCK TOGGLE MODE
This engine starter has a built-in starter kill
features and even if the starter kill is not
installed, the logic for it still dominates the
operation of the system. What this means is that
the starter kill will arm automatically 45 seconds
after the vehicle’s Ignition is turned “OFF”. The
vehicle’s starter wire is then interrupted until the
starter kill is disarmed by pressing Button 1
(Unlock) on the remote. If the doors were not
locked within the initial 45 seconds of the
Ignition being turned “OFF” the first press of
Button 1 will disarm the starter kill, unlocking
the already unlocked doors before they can be
locked again, arming the starter kill.
Enabling Toggle Mode will circumvent this logic
and allow the doors to lock on the first press of
the Button regardless of how much time has
elapsed since the Ignition was turned “OFF”.
This means that when the doors are resting in the
unlocked state, the next logical step for the
system to take is to lock the doors. When the
doors are in the locked state the next logical step
for the system to take is to unlock the doors.
Selecting Toggle Mode will automatically enable
Ignition Lock.
FUNCTION 2
OPTION 1*
Constant “GROUND OUT”.
OPTION 2
Pulse “GROUND OUT”
(1
sec).
FUNCTION 3
OPTION 1*
.75 second door lock / unlock
pulses.
OPTION 2
4 second door lock / unlock
pulses.
OPTION 3
One 1 second lock pulse and
two ¼ second unlock pulses.
