RESPONSIBILTY OF OWNERS/USERS
DEFLECTION
It is the responsibility of the user/purchaser to advise the manufacturer where deflection
may be critical to the application.
INSPECTION & MAINTENANCE
The turntable shall be inspected and maintained in proper working order in accordance
with Autoquip’s Operation & Service Manual and with other applicable safe operating
practices.
REMOVAL FROM SERVICE
Any turntable not in safe operating condition such as, but not limited to, missing rollers,
pins, or fasteners, any bent or cracked structural members, cut or frayed electrical
wires, damaged or malfunctioning controls, detents or manual locks, etc. shall be
removed from service until it is repaired to the original manufacturer’s standards.
REPAIRS
All repairs shall be made by qualified personnel in conformance with Autoquip’s
instructions.
OPERATORS
Only trained personnel and authorized personnel shall be permitted to operate this
turntable.
BEFORE OPERATION
Before using the unit, the operator shall have:
•
Read and/or had explained, and understood, the manufacturer’s operating
instructions and safety rules.
•
Inspected the turntable for proper operation and condition. Any suspect item
shall be carefully examined and a determination made by a qualified person as to
whether it constitutes a hazard. All items not in conformance with Autoquip’s
specification shall be corrected before further use of the turntable.
DURING OPERATION
The equipment shall only be used in accordance with Autoquip’s Operation & Service
Manual.
•
Do not overload the turntable.
•
Ensure that all safety devices are operational and in place.
MODIFICATIONS OR ALTERATIONS
Modifications or alterations to industrial turntable shall be made only with written
permission of Autoquip. Autoquip does not foresee and does not anticipate
unauthorized modifications, and these changes or alterations are grounds for voiding all
warranties.
4
