SPECIFICATIONS
UNBALANCED LOADING — CHAIN & SPROCKET MODELS:
1. All standard turntable capacities assume that the load on the turntable is
uniformly distributed and that the center of gravity of the load is placed
within 10” of the center pin.
2. Standard turntables are not designed to withstand true edge or axle loading.
If edge or axle loading is anticipated, additional turntable support rollers must be
located at the turntable edges for this design. Contact Autoquip Service Department
for questions on turntable loading.
WARNING!
Load the turntable top as evenly as possible to prevent
overloading. Excessive eccentric loading may overstress the
turntable structure and cause the load to become unstable,
possibly resulting in serious personal injury.
UNBALANCED LOADING — RING BEARING MODELS:
1. Ring bearing turntables are designed to withstand eccentric loading. Do not,
however, exceed the edge load rating stamped on the nameplate.
2. Though the platform is designed to withstand offset loading, ensure that the
turntable base is rigidly attached to its mounting surface to prevent tipping of
the load.
14
