Features
·Full high-definition video playback at up to 1080p resolution for an amazing viewing experience.
·Up-conversion of standard definition DVDs for enhanced picture quality at up to
1080p over a HDMI connection.
·Rich multi-channel surrounds sound.
·Simple installation using a single HDMI cable (cable not included)
·Multiple outputs for connecting your home theater system or amplifier.
·Picture in Picture functionality that lets you display primary and secondary video at the same time.
(When supported by the Blu-ray Disc)
·Pop-up menu display without interrupting playback (When supported by the
·Blu-ray Disc)
·HDMI 1080p/60Hz output (Blu-ray Discs only) that provides smooth playback of video with a
frame rate of up to 60 frames per second (TV must be connected with a HDMI cable and be
compatible with 1080p 60Hz)
Package Contents
Before installing your new Blu-Ray Player please ensure that you have received all the
following items:
·Blu-Ray Player
·Remote Control
·AV cable
·User Manual
Start up guide
Before you set up your new Blu-Ray Player please position it on a flat stable surface within reach
of your TV connection. To connect your Blu-Ray Player please follow the below instructions:
1. Connect your Blu-Ray Player to your TV. You have two options to do this. You can use HDMI for
the best possible connection, or composite. When connecting your Blu-Ray Player with
composite
please
ensure
that
you
match
the
coloured
ends
on
both
the
Blu
-
Ray
Player
and
your
TV
.
2
.
Plug
the
Blu
-
Ray
Player
into
power
and
turn
it
on
.
3
.
Insert
battery
into
the
remote
.
4
.
Change
the
input
on
your
TV
to
the
corresponding
input
you used in step 2.
e.g. AV1
or
HDMI1.
3
St
art
u
p
G
ui
d
e
startup is slow.
This is not a defect.
If
your
player
is
connected
to
the
TV
with
an
HDMI
cable
,
startup
is
slow
.
This
is
not
a
defect.
Problem: When reading a disc, the disc tray opens
Solution: Make sure that the disc is not dirty.
The disc may be incompatible with your player. Try another disc.
Reset your player.
Problem: Audio or video pause during playback
Solution: Make sure that the disc is not dirty.
Reset
your
player
.
Problem: The player is on and the logo and menu appear, but there is no image
from the disc
.
Solution: Make sure that the disc is not dirty.
Reset your player.
Problem: The player freezes when reading a disc.
Solution: Reset your player. When you see loading on the screen, press (open/close) to
open thedisc tray and remove the disc. Clean the disc and try the disc again.
If
your
player
freezes
again
,
the
disc
may
contain
some
content
that
is
not
compatible
with
your
player
.
Do
no
try
playing the disc with your player.
TV Screen and Video
:
Problem: Video does not appear on the TV screen or the picture is distorted
Solution: Make sure that the TV is connected to the correct jacks on the back
of
your
player
.
Make
sure
that
the
TV
is
set
to
the
correct
video
input
source
.
The
TV
may
be
in
screen
saver
mode
.
Check
the
documentation
that
came
with
the
TV
for
instructions
about
waking
your TV.
Reset
your
player
.
Problem: Video is not output in high definition
Solution: High definition video cannot be output through the VIDEO OUT jack.
You must connect the TV to your player using the COMPONENT OUT jacks or HDMI jack.
Make sure that the correct HDMI or component video resolution has been selected in the
Setup menu.Depending on the Blu-ray Disc, output from the COMPONENT VIDEO OUT
jacks may be restricted to 480p.
Problem: The 4:3 aspect ratio picture expands left and right or the picture size is incorrect
.
Solution: Use the TV to change the aspect ratio. See the documentation that came with the TV.
When
using
a
component
video
cable
,
set
TV
Aspect
to
4:3
Pan
&
Scan
.
Problem: There is no apparent change in the picture quality when the picture
20
T
rouble Shooting
settings
are
changed
in
the
Setup
menu
Solution: Depending on the video type, changes may not be apparent.
