3
Description
The
Autoplugin Key-V4
is an electronic module designed to add a remote control
ability to the fuel-fired heater (parking heater, fuel operated heater, pre-heater),
factory installed in
Volvo V40
(2012- ) or
Volvo V40 Cross Country
(2012- ).
The device is plugged into the diagnostic socket, placed on the dashboard, and
controls the heater via CAN-bus.
Module’s Possibilities
·
Immediate start of the heater with Volvo car’s key. The remote control
key with 5 buttons or the PCC with 6 buttons can be used for heater
control
·
Immediate stop of the heater with Volvo car’s key
·
Indication of heater autonomous operation with direction indicators
flashing in rearview mirrors.
·
Additional protection of the main battery from discharging inspecting
voltage level and time of autonomous operation of the heater
Package Content
1. Autoplugin Key-V4 cartridge
2. User Manual brochure
Connection
The module needs that 2 timers and direct start / stop function for the heater
control are present in CIP. Therefore it may be necessary to load the special
software to the CIP at first by the means of Volvo dealer’s equipment.
Autoplugin Key does not need professional installation. Find the diagnostic socket
at the left lower point of the dashboard. The socket is placed near to the handle for
bonnet opening. Take the module to your hand and gently push it into the socket.
LED starts flashing for approximately 10 seconds, waiting for information from
CAN-bus. Wait until the LED stops flashing before operation. Turn the ignition on
if the LED continues flashing after 10 seconds expired.
