1.1
Unpacking the 1YDM
Before opening the shipping boxes, examine them for any
signs of damage. If a box is partially crushed or any side has
been broken open, notify the shipping agency immediately.
The shipping box containing the master enclosure also holds
invoices, instructions, extra fuses, the 1Y Series Distribution
Matrices User Reference Manual, the power cord, an extender
board and tuning tool, and other enclosure products. If your
matrix is comprised of multiple enclosures, each box also con-
tains an inter-enclosure linking cable. The shipping boxes are
marked as “Container #_of_.” The first blank is for the box
number and the second blank is for the total number of boxes
in the shipment. The box marked Container #1 holds the
master enclosure. A 2 rack unit (4-slot) enclosure weighs ap-
proximately 15 lb. After removing the master enclosure from
1-2
Chapter 1
AutoPatch
TM
1YDM Series
CANCEL
T AKE
OU T PU T
INPU T
MAT RIX
PRESET CHANGE
Pow er ON
Rack Mounting Ears
Matrix Keys
Input & Output Keys
<Preset>
<Change>
<Cancel>
<Take>
Power On LED
figure 1.1 Standard 1Y X/Y Control Panel (top), 1Y 16x16 X/Y Control Panel (middle), rear view of 1Y (bottom).
Your control panel and matrix may differ from those pictured above.
Serial Ports
Expansion Slots
Outputs
Inputs
CPU Board
Rear Main
Power Connector
Power Switch
Fuse Drawer
