Autonics KRN50 SERIES, User Manual

Page: 52 / 98

8� Recording
52
© Copyright Reserved Autonics Co., Ltd.
(8) High-limit alarm [PV.Hi]
(9) Low-limit alarm [PV.Lo]
※
Standby sequence function
If only alarm output starts within relevant alarm condition range
setting PV of the point of time of power on, the first alarm output does
not operate and the second alarm output starts operating. (Refer to
※ 1)
However if alarm output starts out of relevant alarm condition range
setting PV of the point of time of power on, the first alarm output
starts operating same as general alarm. (Refer to
※
2)
Application condition: When power on or changing alarm value, alarm
output operation mode, alarm option.
※
Alarm latch function
Once alarm output is on, it will hold on even out of alarm output
range. (Alarm output hold)
Cancellation condition: If need to cancel alarm latch function, please
press
3
+ key for over 3 sec after current PV is lower than alarm
value.