Autonics KRN50 SERIES, User Manual

Page: 35 / 98

8� Recording
35
© Copyright Reserved Autonics Co., Ltd.
8� Recording
8�1 Recording preparation
(1) Setting and checking date/time
This function is to set date(Year, Month, Day) and time(Hour, Min, Sec)
of recorder. When using recorder at the first time, user must check
setting time because recording time follows setting time. When entering
into parameter mode according to previous setting time, the entry time
is indicated.
(2) Current date [Date]
● Setting range: 00y01m01d to 99y12m31d (unit: -)
Day is set automatically.
(3) Current time [Time]
● Setting range: 00:00:00 to 23:59:59
● Setting date and time
i. If pressing key for 3 sec, it enters into the upper setting
menu.
ii. If pressing key after selecting Date/Time Setup by
3
, key,
it enters into the lower setting menu from the upper setting menu.
iii. If pressing key after moving the cursor to Date by
3
, key,
it enters into the date setting category. Then if the cursor flashes at
the position for change, moving the cursor by key and setting the
value by
3
, key. After then if pressing key, setting value is
saved.
iv. Time setting method is same as 3rd.