Automotive Data Solutions iDatalink Maestro RR Manual Download Page 58

Page: 58 / 139

ADS-RR(SR)-HK1-DS-IG-EN

maestro.idatalink.com

Hyundai sonata Hybrid witHout amP witHout naV witHout 8 incH screen 2016-2017

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from

aftermarket radio main harness to the HK1 T-harness and
match the wire functions.

STEP 2

• Remove the factory radio.
• Assemble the HK1 T-harness (connect CAM3 connectors as

shown in the diagram).

• Connect the factory radio harness to the HK1 T-harness.

STEP 3

• Plug the male BLACK 2 pin connector of your HK1

T-harness into the OBDII harness.

• Cut and remove the OBDII connector on the OBDII harness.
• Locate the 40 pin connector at the back of the climate

control panel.

• Connect RED/BROWN wire (HK1) to ORANGE wire at pin 24

(do not cut vehicle’s wire).

• Connect YELLOW/BROWN (HK1) to GREEN wire at pin 25

(do not cut vehicle’s wire).

STEP 4

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the backup camera RCA into the aftermarket radio (if

applicable).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack

of the aftermarket radio (If there is no iDatalink audio input,
connect to AUX).

Note: On Pioneer radio, ensure that there is nothing plugged
into the W/R port.

STEP 5

• Connect all the harnesses to the Maestro RR module then

test your installation.

Summary of Contents for iDatalink Maestro RR












































































































































Search results

Summary of Contents for iDatalink Maestro RR

Reviews:

Automotive Data Solutions iDatalink Maestro RR, Manual, Page: 58 / 139

Search results

Summary of Contents for iDatalink Maestro RR

Reviews: