Automotive Data Solutions iDatalink Maestro RR Manual Download

Page: 4 / 139

ADS-RR(SR)-HK1-DS-IG-EN

maestro.idatalink.com

Hyundai accent all trims 2012-2017

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from

aftermarket radio main harness to the HK1 T-harness and
match the wire functions.

STEP 2

• Remove the factory radio.
• Connect the factory radio harness to the HK1 T-harness.

STEP 3

• Plug the male BLACK 2 pin connector of your HK1

T-harness into the OBDII harness.

• Plug the OBDII connector into the OBDII of the vehicle,

located under the driver side dash.

STEP 4

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack

of the aftermarket radio (If there is no iDatalink audio input,
connect to AUX).

Note: On Pioneer radio, ensure that there is nothing plugged
into the W/R port.

STEP 5

• Connect all the harnesses to the Maestro RR module then

test your installation.

Summary of Contents for iDatalink Maestro RR












































































































































Search results

Summary of Contents for iDatalink Maestro RR

Reviews:

Related manuals for iDatalink Maestro RR

Brands by name

Popular brands

Automotive Data Solutions iDatalink Maestro RR, Manual

Search results

Summary of Contents for iDatalink Maestro RR

Reviews:

Related manuals for iDatalink Maestro RR

Brands by name

Popular brands