Automotive Data Solutions iDatalink Maestro RR Manual Download Page 124

Page: 124 / 139

ADS-RR(SR)-HK1-DS-IG-EN

maestro.idatalink.com

Kia sorento witHout amP witHout naV witHout 8 incH screen 2016-2018

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from

aftermarket radio main harness to the HK1 T-harness and
match the wire functions.

STEP 2

• Remove the factory radio.
• Assemble the HK1 T-harness (connect CAM2 connectors as

shown in the diagram).

• Connect the factory radio harness to the HK1 T-harness.

STEP 3

• Plug the male BLACK 2 pin connector of your HK1

T-harness into the OBDII harness.

• Cut and remove the OBDII connector on the OBDII harness.
• Locate the 30 pin CAN Gateway harness in the radio cavity

(attached to the subframe behind the radio on the driver’s
side). Locate the SOLID WHITE wire and SOLID BLACK wire
(pinned on top of each other).

• Connect RED/BROWN wire (HK1) to WHITE wire (do not cut

vehicle’s wire).

• Connect YELLOW/BROWN (HK1) to BLACK wire (do not cut

vehicle’s wire).

STEP 4

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the backup camera RCA into the aftermarket radio (if

applicable).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack

of the aftermarket radio (If there is no iDatalink audio input,
connect to AUX).

Note: On Pioneer radio, ensure that there is nothing plugged
into the W/R port.

STEP 5

• Connect all the harnesses to the Maestro RR module then

test your installation.

Summary of Contents for iDatalink Maestro RR












































































































































Search results

Summary of Contents for iDatalink Maestro RR

Reviews:

Automotive Data Solutions iDatalink Maestro RR, Manual, Page: 124 / 139

Search results

Summary of Contents for iDatalink Maestro RR

Reviews: