background image

I. Device overview

This device was designed to offer a quick development support for cashless systems on
Executive   vending   machines   and   using   MDB   payment   systems.   It   acts   like   a   bridge
between   any   Executive   machine   and   MDB   payment   systems   (bill   validator,   coin
acceptor/changer  and a cashless device).  This device is working only  with Level  3  or
higher coin changers, because it only supports alternative payout change mode of MDB
protocol.

IMPORTANT!!! - The machine must be set on Executive, either price holding mode (prices
are kept on the device not on the machine) or with prices on the machine. When the prices
are held on the machine, you will not be able to obtain a total value of sold products, unles
your application keeps the prices for each item, too.

It can be used on any Executive price holding vending machine with a maximum of 96
selections (products).

The device is self maintained and transparently manages the entire Executive, MDB and
transactions flow.

The main functions available remotely by using serial port are:

reading device memory (including sales counters, cash counters, vending settings,
etc.);

writing device memory (erasing counters, setting prices, setting vending settings,
etc.);

rising a credit to the vending machine;

give some change to the customer;

reading informations about the MDB cash payment systems status;

reading informations about the current selected product on the machine’s keyboard;

reading informations about the last transaction (vend success, vend failed);

reading informations about the cash inserted and about the change returned to the;

reading informations about the VMC status;

resetting the device.

© - 2018 – AUTOMATROM SRL – 

www.automatrom.ro

                                                                             Page 4/26

Summary of Contents for PICOBRIDGE RS232



























Reviews: