AutomationDirect IronHorse HGR-37-005-A, User Manual

Page: 28 / 38

Page 3–8 IronHorse® Helical Gearbox User Manual – 1st Ed. Rev. B
Chapter 3: Installation, Maintenance and Lubrication
Storage
If the helical gearbox won’t be used immediately and needs to be placed in storage for
a period of time that exceeds six months, please pay attention to the special storage
instructions outlined below.
1) If the gearbox is to be placed in long term storage, care should be taken by applying
anti-corrosion inhibitors on all non-coated parts, including the input shaft, output shaft, flange,
and foot mounts Units should be stored under a water proof cover and care should be taken to
keep the units free of dust and debris
2)
All units should be stored in a dry, dust free environment Avoid exposing the units to sunlight
during storage
3) All units should be stored in a temperature controlled environment, between 5° and 40°C
(41° and 104°F)
4) If the storage time exceeds 2 years, please inspect units carefully before use Units should be
examined for rust Units with rust should not be placed into operation Check all bearings,
seals, oil fill levels and oil specifications before use Refer to the Lubrication section for proper
oil specifications