Page 5
SR35-KPD-REM
– 1st Ed. – 7/9/2020
IP66 Remote Keypad User Guide
If any of the Modbus communication parameters are dissimilar on the host unit or remote keypad,
communication will not be established. The keypad will display the following screen:
Local
Remote
Modbus
Local..01
NO SLAVE
Only RIGHT
key is Active
By pressing the Right key, the user will be taken directly to the Modbus address selection menu:
Press the CENTER
Key
Address
1
Address
1
Cancel
Use UP/DOWN
keys to select
address.
Press CENTER
to confirm.
If the selected Modbus address is valid, the status screen is displayed:
Local..01
READY
