Page 4
SR35-KPD-REM
– 1st Ed. – 7/9/2020
IP66 Remote Keypad User Guide
Operation
Once connected to the SR35 starters, menu structures and programming are the same as detailed in
the SR35 user manual and quick start guide.
However, specific steps must be taken to connect the Remote Keypad to one or more SR35 starters.
Initial Power-Up
If the host SR35 starters and the remote keypad have the default Modbus transmission parameters
set, and the host SR35 is powered and has Keypad power set to ‘on’, the keypad will automatically
communicate with the host. The following status screen will be seen:
Motor Overload
Level
Status of
Connected Host
Control Method
(Local, Remote,
Modbus)
Modbus Address
of Connected
Unit
Navigation
Wizard
(Displays
‘Active’ Keys)
Local..01
READY
