C4-1280-GigE Camera Hardware Reference Manual Rev. 1.4
•
25
Description
Part Number Binder Series 712
M9 5-pin male connector 90° angled,
EMV protected
99-0413-75-05
Description of LEDs
LED
Description
1 (PWR)
During boot:
Green On = FPGA configuration done
Red On = Loader Stop. Boot failed. No valid Image could be loaded.
After boot:
Green On= Boot completed
2 (USR)
During boot:
Green fast blink = boot procedure takes places
Green blink = Configuration Error, FPGA configuration failure. Boot procedure is repeated up to 3
times, after which the Factory-Image is loaded.
Green On = camera start up completed, FPGA configuration success
Off = FPGA configuration successful after error recovery
Red On = a boot error has occurred
After boot:
Red On= no network found
Off = network found
Green On=CCP status connected
3 (LSR)
On = Laser is ON
Off = Laser is OFF
4 (GigE_left)
Green blink = Indication of network activity
5 (GigE_right)
Green On = Linkspeed 1 Gbit
Yellow On = Linkspeed 100 Mbit
Off = Linkspeed 10 Mbit or wait for end of autonegotiation
