background image

 

Page 25 of 26 7/9/19

ROLLER MILL

LIMITED WARRANTY

 

Automatic Equipment Manufacturing Co. (“Automatic”) warrants to the first retail 

purchaser that each item of equipment manufactured by Automatic shall be free from 

defect in material and workmanship under normal use and service for a period of one 

year from the date of delivery. In the case of equipment used for commercial or rental 

purposes, such warranty period is limited to 30 days from the date of delivery to the 

first retail purchaser.

 

During said one-year period (30 days in the case of equipment used for commercial 

or rental purposes), Automatic will repair or replace any parts which (a) shall be 

returned to an authorized dealer, distributor, or the factory, with transportation charges 

prepaid, and (b) after examination by Automatic, are found to be defective. This 

limited warranty will not cover, in any way, any alleged damages caused by incorrect 

or improper installation, improper use, modification or neglect of product, or failure 

of the user to follow the guidelines contained in the instructional material provided 

by Automatic. Automatic does not warrant electrical equipment or other items 

manufactured by any supplier other than Automatic.

 

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS 

OR IMPLIED, AND THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF. AUTOMATIC EXPRESSLY DISCLAIMS AND 

EXCLUDES ANY AND ALL OTHER WARRANTIES, INCLUDING ANY WARRANTY OF 

MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY 

OF AUTOMATIC FOR THE ALLEGED BREACH OF ANY WARRANTY OR CONTRACT 

WITH RESPECT TO ITS PRODUCTS SHALL BE LIMITED TO REPAIR OR REPLACEMENT 

AS SET FORTH IN THIS LIMITED WARRANTY AND IN NO EVENT SHALL AUTOMATIC’S 

LIABILITY EXCEED THE PURCHASE PRICE OF ITS PRODUCT. AUTOMATIC FURTHER 

LIMITS TO SUCH PURCHASE PRICE ITS LIABILITY OF ANY KIND ON ACCOUNT 

OF ANY NEGLIGENCE WHATSOEVER ON ITS PART WITH RESPECT TO ITS 

PRODUCTS. IN NO EVENT SHALL AUTOMATIC BE LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES OR FOR ANY DAMAGES RESULTING FROM MISUSE OR 

MODIFICATION OF ITS PRODUCTS. THIS LIMITED WARRANTY SETS FORTH THE SOLE 

AND EXCLUSIVE REMEDY OF THE PURCHASER WITH RESPECT TO THIS PRODUCT.

 

Automatic reserves the right to make changes or add improvements to its products 

at any time without incurring any obligation to make such changes to previously 

manufactured equipment.

 

No liability is assumed for bodily injury that may be inflicted on the operator, 

spectator or general public who might be in the general area while this equipment is in 

use.

 

IMPORTANT: Coverage and performance under the foregoing limited warranty 

is contingent upon the first retail purchaser completing and returning the warranty 

registration card to Automatic within ten days of delivery date and upon the original 

serial number being visible on the product and unaltered. Automatic will not honor any 

warranty claims unless the warranty registration card is on file at Automatic’s factory in 

Pender, Nebraska.

Automatic Equipment Manufacturing Co.

PO Box P, Pender, NE 68047

©12/93

Summary of Contents for LPE 500



























Reviews: