22
GDO-8 Shed Master®
Owner Installation Instructions
Parameters
Door Status Indicators
Door Opener State
Open LED
Green
Close LED
Red
Door Status
LED yellow
Beeper
Open
On
Close
On
Opening
Flashing
Closing
Flashing
Door travel stopped
Flashing
Door obstructed when
opening
Flashing
Door obstructed when closed
Flashing
Beeps
while door
is moving
Opener overloaded
Alternating fl ashes
Alternating fl ashes
Mains power interrupted
Rapid fl ashes
Buttons
Function
Operate
Opens/Stops/Closes the door
Door code
Codes a transmitter button for OPERATE function
Force Margin Set + plus (+)
Increases the obstruction force margin setting
Force Margin Set + Minus (-)
Decreases the obstruction force margin setting
Force Margin Set (then) Set
Reloads the factory set default obstruction force
margin setting
Close for 6 seconds
Clears the door limits set positions. Limits then need
to be reset
Set (then power on) & hold until all LEDs are off
Deletes control parameters excluding transmitter
storage memory
Door Code (then power on) & hold until all LEDs
are off
Deletes all transmitter stored in memory.
Set for 2 seconds
Re-initialises the Opener to re-calculate force margins
Purchased from:
Phone:
Installed by:
Date:
Serial No:
