p. 6
/11
TL2-QSG-EN-03
• Lift and remove the 2 end boxes (4:3 and 4:2).
4:3
4:2
Fig. 5 - Removing the front and rear end boxes
• Check the condition of the material - although it has been carefully packed, damage may have occurred during
transport.
5.3. GENERAL DIMENSIONS AND INSTALLATION DRAWING
Arm height
X
Dropping arm
750
Standard arm
755
min. 100*
A
A
A
B
B
B
Ø60
Ø15*
160
37.5
37.5
235
550
235
235
40
1300
X
880
210
210
550
80
Power supply and connection wiring inlet, can be through right or left end box
EXPANSIBLE ANCHOR B15/30
-/3413/000
(Suggested reference (M10))
Ø 60 mm PVC SHEATH.
Concrete
Wiring to provide for:
230 V single phase power ground, in 3G2.5 ²
IP CABLE (Ethernet) STP CAT.5
* Dimensions according to standard Automatic Systems anchoring.
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice
.
