Automatic Products SNACKSHOP LCM1 Series, Instruction Manual, Page: 46 / 52

42
trouble shooting chart
Problem Cause Remedy
Use correct change Coin tubes empty Re-fill coin tubes
Says use correct change Replace coin mechanism
with coin tubes full
Spirals turn more than one turn Capacitor discharging current Re-solder capacitor or replace
motor
Loose wire on motor Repair wire
Defective motor switch Replace switch
Defective control board Replace control board
Incorrect vend motors installed Gray or black bodied motors for LCM
More than one motor turns One of the motor wires is Check each individual motor
together shorting out for loose or pinched wire
Defective control board Replace control board
Unable to enter service mode Check plugs on control board Power down and remove and
install connectors
Defective changer Replace changer
Defective main board Replace board
Coin mechanism jackpots Incorrect voltage Check voltages± 10%
Defective coin mechanism Replace coin mechanism
Defective board Replace control board
Motor doesn't home on door No voltage Check for correct voltages
close
Defective door switch Replace door switch
Defective board Replace board