Automatic Products SNACKSHOP 111 Series, Instruction Manual

Page: 12 / 61

Figure 7. LOCATION OF PRODUCT PUSHER
ON SPIRAL.
9. BAGGED OR BOXED ITEMS in the 8-selection shelves if not
loaded properly could be a problem.The sealed edge of the bag
may get under the spiral wire causing the product to hang up after
it has been vended. It is recommended that the lower edge of
these types of product be folded forward and up (see Figure 8)
next to the product before inserting into the spiral space. It is also
recommended to use an 18 count spiral for bagged items
because of the product settling to the bottom of the package.
10. CIGARETTE VENDING FROM SNACKSHOP 111. Cigarettes
can bevended from the candyshelves usingthe (10 capacity) spi-
ral for the soft pack regular, king, 100mm or 120 mm packs. The
(8 capacity) spiral should be used for (box) packs.
CIGARETTE VENDING FROM SNACKSHOP 112. Cigarettes
can be vended from the candy shelves using the (15 capacity)
spiral for the soft pack regualr, king, 100mm or 120mm packs.
The (12 capacity) spiral should be used for (box) packs.
11. LOCK PRODUCT SHELVES. After all the product has been
loaded be sure all shelves are returned to their vend position
behind the front roller guide.
12. INSTALL PROPER PRICE TABS into price tab holder for each
selection in the main product area.(See Figure 9.)
13. LOADING GUM AND MINT. The Gum and Mint shelf is located
below the Snack Shelves (optional). Unlatch the shelf by pulling
forward thetwo metal latches located tothe right and left of the
shelf and pull forward.The cover can be pushed back to the rear
for easy loading.The shelf contains four individual selections.
Figure 8. FOLD BAGGED ITEMS BOTTOM
EDGE FORWARD AND UP.
Figure 9. INSTALING
PRICE TABS
The first selection on the left contains two fillers for use with thin
mints. (Rolaids - Certs, etc.). These fillers can be removed for
standard gum or mints.
The two selections on the right of the Gum and Mint shelf also
have fillers. These selections can be used for standard size gum
and mints or the fillers may be removed for larger gum and mint
products.
Each selection has a display hinge assembly which should be
adjusted after the shelf is loaded. To adjust the display hinge,
loosen the wing nut and slide the spring hinge of the flipper over
the second product and fasten tightly.
8
installation