Programming
937
Series
0208
4.05
Mode 5-2 – Set Golden Eye
Selections
Mode 5-2 is used to set up the Golden Eye
Selections. To access this mode, press the Service
Switch 5 times, then press
2
on the selection keypad
the display will show “Set Golden Eye Sel”.
Press the
*
key the display will show the selections
currently active for Golden Eye in the top line, if
necessary press the
*
key to see any subsequent
screens. If no selections are currently enabled, the
display will show “None Assigned”. The factory
default for Golden Eye is all selections enabled.
Press the
*
key the display will show “Enter Start
Location” use the selection keypad to enter the
selection number. Press the
*
key and the display
will show “Enter End Location”, use the selection
keypad to enter the ending location. See notes
below for further explanation.
Notes:
♦
To Set Single Selections:
Enter the same
starting and ending locations.
♦
To Set Entire Shelves:
In the
Start Location
enter 2X* where X represents the shelf number.
The display will change to the ending location
screen with the last selection of that shelf
already displayed. Press
*
to set.
♦
To Set Entire Machine:
In the
Start Location
enter 2* the display will change to show the
selection range of the machine in the top line
and “Continue? *=Y” in the bottom line. Press
*
to set.
♦
To Set a Range of Selections:
Enter the
starting selection number into the
Start
Location
then enter the last selection number
into the
End Location
. Press
*
to set.
Rules: Single Selection, Range, Shelf or Entire
Machine
♦
When enabling or disabling single selections
the opposite state of the current setting will be
used. For example: if you currently have
selection 210 enabled and you go into change
it, it will change to disabled.
♦
When enabling or disabling a range, shelf or
the entire machine. The setting will change to
the opposite of the lowest selection number in
the range, shelf or machine being set. For
example if you are changing the top shelf, and
selection 210 is set to enable while 212 -216
are set to disable, then you would be
disabling the top shelf from Golden Eye
because the lowest selection number on the
shelf was set to enable.
Mode 5-2 – Set Golden Eye Selections
Initial Screen
SET GOLDEN-EYE SEL
Mode 5-2 – Screen 2 Set Golden Eye Selections
Field A
is the currently enabled Golden Eye
selections.
XXX-XXX
PRESS * TO CONTINUE
Field A
Mode 5-2 – Screen 3 Set Golden Eye Selections
Field A
is the starting selection number entry field.
ENTER START LOCATION
XXX
Field A
Mode 5-2 – Screen 4 Set Golden Eye Selections
Field A
is the ending selection number entry field.
ENTER END LOCATION
XXX
Field A
Mode 5-2 – Screen 5 Set Golden Eye Selections
Field A
is the starting and ending selection number
entry field.
Field B
is the action field; either enabled or disabled.
XXX – XXX YYYYY
CONTINUE? * Y
Field B
Field A
V2.3
Summary of Contents for PREMIER 937 SATELLITE
