5
52
2
© 2005 Directed Electronics—all rights reserved
ttaabbllee ooff zzoonneess
When using the Diagnostic functions, use the Table of Zones to see which input has triggered the system. It is
also helpful in deciding which input to use when connecting optional sensors and switches.
N
NO
OTTEE: The Warn Away® response does not report on the LED.
sshhuuttddoowwnn ddiiaaggnnoossttiiccss
1. With the ignition OFF, press and H
HO
OLLD
D the Valet/Program button.
2. Turn the ignition ON and then back OFF while H
HO
OLLD
DIIN
NG
G the Valet/Program button.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button. The LED will report the last shutdown for one minute or until
the ignition is turned on.
LLEED
D FFLLA
ASSH
HEESS
SSH
HU
UTTD
DO
OW
WN
N M
MO
OD
DEE
One
Timed out
Two
Over-rev shutdown
Three
Low or no RPM
Four
Transmitter shutdown (or optional push-button)
Six
(-) Shutdown (H3/4 GRAY) or (+) Shutdown (H3/3 BROWN)
Seven
(-) Neutral safety shutdown (H3/1 BLACK/WHITE)
Eight
Wait-to-start timed out
ttoo ppeerrffoorrm
m sshhuuttddoow
wnn ddiiaaggnnoossttiiccss
ZZO
ON
NEE N
NO
O..
TTR
RIIG
GG
GEER
R TTY
YP
PEE
IIN
NP
PU
UTT D
DEESSCCR
RIIP
PTTIIO
ON
N
1
Trunk Input
BLUE (H1/7)
2
Multiplexed Shock Sensor Input Mux BLUE wire.
3
Door Trigger
GREEN (H1/8) and VIOLET (H1/6).
4
Multiplexed Shock Sensor Input Mux GREEN wire
5
Ignition
Yellow ribbon harness wire
6
Hood Brake Trigger
GRAY on the 6-pin shutdown harness.
