background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AIR100L                                           03

6 Additional Safety Instructions for 
compressed air and blasting guns 

 
6.1 During operation Compressor pump and 
lines can become extremely hot. Touching 
these parts is dangerous and will burn you. 
 
6.2 Air which is compressed must be kept free 
of any impurities which could cause fires or 
explosions in the compressor pump.  
 
6.3 Always secure the hose coupling as you 
release it. This prevents injury caused by a 
rebounding hose. 
 
6.4 Wear Safety goggles when using the 
blowout pistol. Eyes are extremely sensitive 
and easily injured by small and large foreign 
bodies, which are disturbed when using the 
pistol.  
 
6.5 Do not use or point the Blowout pistol on 
or at others.  
 
6.6 Do not clean clothes or use on yourself 
this can cause injury.  

 

7 Additional Safety Instructions for Paint 
Spraying 

 
7.1 Do not use paints or solvents whose flash 
points are below 55

°

C as there is a risk of 

explosion. 
 
7.2 Never heat up paints or solvents this can 
lead to fires or explosions.  
 
7.3 If using hazardous liquids, wear protective 
face guards and adhere to all safety 
information for the liquids provided by the 
manufacturer. 
 
7.4 Do not smoke while operating and/or in the 
work area. Paint vapours and other small 
particulates are highly combustible and can 
explode.  
 
7.5 Evaluate the situation and wear suitable 
clothing and masks if the situation calls for it.  
 
7.6 Never set up or operate the machine while 
near to or in the vicinity of a fire place, open 
lights, sparking machines or any naked flame.  
 
7.7 keep food and drink away from work area 
paint vapours are damaging to your health. 
 
7.8 Use in a well ventilated area. 
 
7.9 Ensure that the work area is at least 

૜૙࢓

 
7.10 Do not use materials such as white spirits, 
Butyl Alcohol and methylene chloride with the 
PVC hose. These materials will destroy the hose 
damaging the product and creating an unsafe 
work environment. 

 

 

GENERAL POWER TOOL SAFETY WARNINGS

Summary of Contents for AIR100L





















Reviews: