Page 13 of 17
CONFIGURATION
To match controller parameters to the individual vehicle type choose
CONFIGURATION
menu; software
detects petrol engine parameters and automatically adjusts LPG mode parameters.
CONFIGURATION
is activated with the key
GASOLINE
.
Dialog windows shows commands to execute to configure the controller for a LPGpowered vehicle.
During check of gasoline mode parameters individual parameters will be displayed within a table; during
LPG mode configuration revolutions of actuator will be added for individual rpms.
CONFIGURATION – GASOLINE
Start controller configuration for gasoline with the key
GASOLINE
.
According to dialog window commands proceed as follows:
start the engine
set working mode
GASOLINE
(control panel key or mouse)
keep idle rpm - gasoline mode parameters will be checked
increase rpm to 3000 - gasoline mode parameters will be checked once again
At this moment all parameters indispensable for LPG controller operation will be stored to the
parameter table - match them to the engine type.
NOTE
: sensor type (standard / res, -) is not recognised automatically. Insert sensor parameters
manually to the window
PARAMETERS
after
CONFIGURATION
(e.g. OPEL OMEGA, lambda sensor
5 V, res).
