INSTRUCTION MANUAL COMMERCIAL 2 CHARGING STATION
4
1. INTRODUCTION
2. KEY INFORMATION
2.1 INFORMATION ABOUT THE MANUAL
This manual describes how to operate the charger properly and safely. Be sure to follow
the safety instructions given here, as well as any local safety regulations and general safety
instructions.
Before you put the charger into use, make sure that the instructions, the «Safety» paragraph
in particular, have been read through and understood completely. This manual is an integral
part of the station and and should therefore be kept in its immediate vicinity.
2.2 WARNING SYMBOLS
Important safety instructions in this manual are marked with symbols. These safety
instructions must be strictly adhered to. Always pay attention to them and follow the safety
instructions to avoid accidents, personal injury or material damage.
WARNING!
Risk of injury or death
This symbol indicates instructions that must be followed to avoid injury,
trauma or death.
COMMERCIAL 2
- is a high quality charging station (hereinafter referred to as «the
station»), which is made using the latest solutions in the field of power electronics and
technology, based on the modern components combined with the microcontroller signal
processing technology, which ensures high efficiency, functionality and reliability of the
charger.
This, together with the software and accessible interfaces, provides a
flexible
and
productive
solution for electric vehicle charging that meets the highest quality standards.
The product is designed to control the energy consumed from a 380V AC three-phase
network or from the 220V AC single-phase network to charge an electric vehicle battery.
The product is equipped with an intelligent microcontroller control system and
communication devices that allow for the exchange of information with the electric vehicle
and set the value of the charge current and voltage, according to the needs of the electric
vehicle in real time.
