Autodesk 23703-010008-1600A - Civil 3D 2006 Essentials, Manual

Page: 92 / 136

6 Optionally, create new sites to separate the data. Right-click Sites
➤
New. The new site will appear under the Sites collection. You can move
parcels and alignments (and associated profiles) by dragging them into
different sites.
7 Either click Apply, to iteratively import and check messaging, or click
OK.
A message box is displayed, indicating the status of the import. Click OK.
8 Either go to Step 9 or, if you have completed an iterative import process
using Apply, click OK.
9 Verify the data using the following methods:
■ Description keys : In Toolspace, on the Settings tab, expand the
Description Key Sets collection under the Point collection and verify
that the description key files are listed.
■ Surfaces : In Toolspace, on the Prospector tab, click the Surfaces
collection (for the current drawing) and verify that the new surface
is included. (You may need to right-click the feature and click Zoom
To to see the surface in the drawing.)
■ Alignments (Sites) : In Toolspace, on the Prospector tab, if you specified
a Site in the Import Data From Land Desktop Project dialog box, verify
that the site is included. If you did not specify a Site, expand the
Alignments collection and verify that the alignments are included.
■ Profiles : In Toolspace, on the Prospector tab, if you specified a Site in
the Import Data From Land Desktop Project dialog box, verify that
the site is included. If you did not specify a Site, expand the
Alignments collection and verify that the profiles are included.
■ Parcels : In Toolspace, on the Prospector tab, if you specified a Site in
the Import Data From Land Desktop Project dialog box, verify that
the site is included. If you did not specify a Site, expand the Parcels
collection and verify that the parcels are included.
■ Pipe Runs : In Toolspace, on the Prospector tab, click the Pipe Networks
collection and ensure that the pipes are included.
84 | Chapter 4 Tools for Moving Data