Autodesk 23703-010008-1600A - Civil 3D 2006 Essentials Manual Download Page 3 | Manualshive

Page: 3 / 136

background image

This product includes code licensed from RSA Security, Inc. Some portions licensed from IBM are available at http://oss.software.ibm.com/icu4j/.
The Sentry Spelling-Checker Engine Copyright

©

1994-2003 Wintertree Software, Inc.

Portions of this product include one or more Boost libraries. Use of the Boost libraries is subject to its license agreement
http://www.boost.org/LICENSE_1_0.txt.

Stingray

®

is Copyright

©

1995-2005, Quovadx, Inc. All Rights Reserved. Protected by copyright and licenses restricting use, copying, distribution

and decompilation. The Rogue Wave name and logo and the Stingray name and logo are either registered trademarks or trademarks of Quovadx,
Inc. in the United States and/or other countries.
Xerces and Xalan are Copyright

©

1999-2005, The Apache Software Foundation. Licensed under the Apache License, Version 2.0; you may not

use this file except in compliance with the license. You may obtain a copy of the license at the following web address:
http://www.apache.org/licenses/LICENSE-2.0.
Copyright

©

1998-2006 The OpenSSL Project. All rights reserved.

This product includes software written by Tim Hudson ([email protected]). This product includes cryptographic software written by Eric Young
([email protected]). Copyright

©

1995-1998 Eric Young ([email protected]). All rights reserved.

ACE

™

is copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt

University, Copyright

©

1993-2006, all rights reserved.

The Director General of the Geographic Survey Institute has issued the approval for the coordinates exchange numbered TKY2JGD for Japan
Geodetic Datum 2000, also known as technical information No H1-N0.2 of the Geographic Survey Institute,to be installed and used within this
software product (Approval No.: 646 issued by GSI, April 8, 2002).
MrSID image compression format is Copyright

©

2005, LizardTech, a division of Celartem,Inc. All rights reserved.MrSID technology is protected

by U.S. Patent No 5,710,835 and patents pending.
Portions of this computer program are Copyright

©

2000 Earth Resource Mapping, Inc.

The OSTN97 coordinate transformation is

©

Crown copyright 1997. All rights reserved.

The OSTN02 coordinate transformation is

©

Crown copyright 2002. All rights reserved.

The OSGM02 coordinate transformation is

©

Crown copyright 2002,

©

Ordnance Survey Ireland, 2002.

FME Objects Engine Copyright

©

2005 SAFE Software. All rights reserved.

Libcurl is Copyright

©

1996 - 2007, Daniel Stenberg, <[email protected]>. All rights reserved.

The Redland RDF Application Framework is Copyright

©

2000-2005 Institute for Learning and Research Technology, University of Bristol. Licensed

under the Apache License, Version 2.0; you may not use this file except in compliance with the license. You may obtain a copy of the license
at the following web address: http://www.apache.org/licenses/LICENSE-2.0.
GDAL is Copyright

©

2000, Frank Warmerdam.

Portions of sample data provided by NAVTEQ. Copyright

©

NAVTEQ 2001-2006, All rights reserved.

2D DCM

©

Copyright D-Cubed Ltd. 1989-2005. 2D DCM is a trademark of D-Cubed Ltd.

GOVERNMENT USE

Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer
Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable.

Published By: Autodesk, Inc.
111 Mclnnis Parkway
San Rafael, CA 94903, USA

Acknowledgments

Jerry Bartels, C.N.E., Seiler Instrument, Help Becoming AWOL: Adept Without Land, Autodesk University 2006

«
1
2
3
4
5
...
»

Summary of Contents for 23703-010008-1600A - Civil 3D 2006 Essentials









































































































































Reviews:

No comments

Related manuals for 23703-010008-1600A - Civil 3D 2006 Essentials

Brand: Xerox Pages: 28

CLIENT SECURITY 9.00 - QUICK

Brand: F-SECURE Pages: 32

Brand: VegaStream Pages: 33

OpenView Storage Area Manager (SAM) 3.1

Brand: HP Pages: 13

Brand: HP Pages: 85

Pro 3405 Series

Brand: HP Pages: 9

Brand: HP Pages: 2

Pavilion u600 - Desktop PC

Brand: HP Pages: 2

Brand: HP Pages: 12

Pavilion w1000 - Desktop PC

Brand: HP Pages: 1

Pro 3520 Series

Brand: HP Pages: 15

Brand: HP Pages: 4

Brand: HP Pages: 4

Pro 3500 Series

Brand: HP Pages: 16

Brand: HP Pages: 95

Brand: HP Pages: 106

Brand: HP Pages: 201

Brand: HP Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands