■
If you choose participation in the Customer Involvement Program,
Autodesk sends helpful information about the product.
For more information regarding log files, refer to
Specify Log File Locations
on page 19.
Click Next.
7
On the Review - Configure - Create Deployment page, click Create
Deployment, then select Yes to continue creating the deployment using
the default configuration.
By clicking Create Deployment, an administrative image is created in
your shared folder using the deployment options listed in the Current
Settings field. If you would like a summary of your deployment settings,
click the Copy to Clipboard button.
8
On the Deployment Complete page, click Finish.
Creating a Configured or Customized Deployment
If you plan on altering your deployment by removing features or restricting
access to online resources you can create a configured or customized
deployment.
To create a configured or customized deployment
1
In the AutoCAD Deployment wizard, click Create Deployments.
2
On the Begin Deployment page, specify the following: the administrative
image location, deployment name, and if your target system is either 32
or 64-bit.
■
In the administrative image field, enter the path to your existing
shared network location, or use the Browse button to navigate to that
location. This area is where you create and store your administrative
image. Users install the program from this location.
NOTE
If you do not know how to create a network share, see
Create a
Network Share
on page 12.
■
In the deployment name field, enter the new deployment's name.
The name you enter here is the name of the shortcut users will access
to install the product.
Creating a Configured or Customized Deployment | 41
Summary of Contents for 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP
