Autodesk 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP, Network Manual

Page: 21 / 104

Setting Up a Deployment
The deployment process provides you with numerous options for creating, and customizing
your deployments, so you should set aside ample time to complete the process in one sitting.
To be successful it is recommended that your review the following checklist and information
before you begin. The deployment process is initiated from the Deployment wizard. Once a
deployment is created, users then access the deployment to install products to their computers.
Preliminary Tasks for a Network Deployment
The deployment checklist gives you a quick summary of the type of information
you should be familiar with before begin. When you have completed these
tasks, you are ready to create a deployment.
Deployment Checklist
You have reviewed the system requirements. You must make sure that your
network, servers, and client workstations meet the system requirements.
You understand the type of license you’ve purchased. If you plan a network li-
cense deployment, you should also be familiar with the type of license server
model you want to use and the license server name(s).
You have installed and activated any supporting tools and utilities.
You have located your product serial number and product key. The serial number
and product key are located on the outside of the product packaging, or in the
email you received if you downloaded your product.
You know how you’re going to personalize the program(s) during registration.
Using consistent registration data is very important.
2
15