Autodesk 18507-051452-9325 - UPG ARCH DESKTOP 2007, Installation Manual

Page: 83 / 104

Restore Products Using the Master Image
Should you ever have to reinstall one or more of your products, it may prove
expedient to restore them using the master image.
NOTE Before attempting this, make sure you have saved a copy of each system’s
Software Licenses folder to another system.
1 Exit the application. Do not run the application again until you have
completed this procedure.
2 Open Windows Explorer and copy the Software Licenses folder from the
appropriate path shown below to a location other than the drive that
will be restored.
c:\Documents and Settings\All Users\Application Data\Autodesk\Software
Licenses
3 Restore the master image.
4 Restore the Software Licenses folder (and Product Licenses folder, if
appropriate) that you created in step 2 to its original system and location
on that system.
Because the licensing folders were copied to a location other than the
drive being restored, they were protected during the restoration process.
Once the licensing folders are copied back the system they came from,
the products can be run and no reactivation is necessary.
Distribution by Imaging Software | 77