2.
Press and hold the Multifunction Button (5) until you hear a second beep and the indicator
LEDs flash RED and Blue alternately. The Autocom Air is now ready to be paired with any
compatible Bluetooth device.
3.
On your mobile device, select the Bluetooth settings and scan for devices. You will see “AKE
Stealth-HS-NG v3.00” listed as an available Bluetooth device, now connect to this device.
4.
If asked for a code word, please enter 0000. (This may happen in future when the Air unit
requests to connect to your mobile device).
5.
The Autocom Air stops flashing RED and BLUE alternately when paired successfully. A single
BLUE LED will then flash.
Pairing to a Second Autocom Air
*This mode of operation can be used in a rider / passenger or bike to bike scenario.
1.
Start with the Air units switched-off and turn off all other Bluetooth devices not needed for the
pairing.
2.
Press Multifunction Button (5) on both units in turn until you hear a second beep after switch
on from the unit and the indicator LEDs flash RED and Blue alternately. The Autocom Air is
now ready to be paired with any compatible Bluetooth device.
3.
One short press on Multifunction Button (5) on either Air unit will now pair them together to
form an intercom pairing.
4.
The Autocom Air stops flashing RED and BLUE alternately when paired successfully. A single
BLUE LED will then flash.
Summary of Contents for air
Page 2: ......
