Instruction guide
T-SB
– 1234150
8
Autochair Ltd
Disassembly and transport
The dismantling of the
T-SB
is principally the reverse of the assembly procedure. The slight differences are
described here.
Before starting ensure the
T-MPL
is fully lowered.
Switch the
T-MPL
off.
Switch the Power Pack off.
Disconnect the
T-MPL
power cable.
Remove the Power Pack.
Remove the Spreader Bar, the R-Clip and
T-MPL
and pack using the bag provided.
Move the legs to the closed position by moving the Leg Operating Handle fully to the left.
Remove the Leg Operating Handle and stow on the main Handle using the clips provided.
Lift the Handle assembly from the Base and position the handle into the cut-outs in the legs. The mounting pins
should be face down. Slide the Handle forward then position the back into the stow cradle. Ensure the latch
engages and the Handle is locked in position.
The Handle can now be used to lift the front and wheel the unit along on the back castors.
