Instruction guide
T-SB
– 1234150
2
Autochair Ltd
Table of contents
Safety instructions .................................................................. 2
Definitions............................................................................... 3
Technical data......................................................................... 3
Measurements........................................................................ 3
Assembly instructions..........................................................4-5
User
’s guide ........................................................................... 6
Charging the batteries ............................................................ 6
Disassembly and transport .....................................................7
Simple troubleshooting ........................................................,,,8
Care and maintenance .......................................................... 9
Safety instructions
Before using the lift, make certain that:
• the lift is assembled according to the instructions
• lifting equipment is properly mounted on the lift
• the batteries have been charged for at least 6 hours
• all manuals have been carefully studied and fully understood
• persons using the equipment have received appropriate instructions and training
• that in each individual lifting situation you have the correct type, size, material, and design
of slings and accessories to safely meet the patient
’s need.
Before lifting, always make certain that:
• the lifting accessories are not damaged
• the lifting accessory is correctly and securely applied to the patient, so that there is no risk of injury
• the lifting accessory is correctly applied to the lifting equipment
• the key hole plates are correctly attached to the spreader bar. This should be checked when
beginning to lift the patient - when the sling straps are
taut
, but before the patient is lifted from the
underlying surface.
Never leave a patient unattended in a lifting situation!
The
T-SB
is intended for indoor use only!
The
T-SB
is NOT intended to be used for direct transfer to a vehicle, the
T-MPL
must
be
installed in the vehicle for vehicle transfers
!
Max. load: 150 kg (330 lbs.)
The load capacity reduces if the
T-MPL
unit length has been increased. Please refer to the
T-MPL
instructions to check the maximum lift capacity for your specific
T-MPL
settings.