Auto Test Workshop Pro, User Manual

Page: 17 / 25

Auto Test Workshop Pro User Manual Page 15
Retrieve saved tests for the
Net Brake
™ software:
Connect your Workshop Pro to the PC with the installed Net Brake
™
software using
the USB-A to Micro-USB cable. (Note: if this is the first time then your computer may
be installing drivers to communicate with the Workshop Pro).
Once the Workshop Pro is connected you need to open the Workshop Pro (HR935)
(Figure 15)
in windows explorer by finding the device in the ‘My Computer’ folder.
Figure 15
Navigate to the test data directory
( Figure 16 ) :
‘HR935\Phone storage\WorkshopPro\’
Figure 16
Now copy the contents of the Folder (or the Folder itself) to a location on your local
Computer and note where it is stored. Using the
Net Brake
™
software you need to
import this new directory (refer to Net Brake
™
guide for steps).
Netbrake .