Auto
Test
Workshop Pro User Manual
Page 14
5.5 Printing a test
In order to print a test report you need to pair the Workshop Pro with the supplied
Thermal Bluetooth Printer, if you haven’t done this yet just continue through the
following print procedure and the app will redirect you to the Bluetooth Pairing screen
when appropriate (Figure 14).
Figure 12
Figure 13
Figure 14
When looking at a test result select the
report icon
from the top right of the
report (Figure 12). You will be prompted
with a selection panel. Choose
via Bluetooth’
(Figure 13) and you will
be asked to select which printer to be
used to print the test.
Make sure the printer you intend to print
from is turned on and select it from the
choose printer dialog. It will begin to
print out shortly.
5.6 Saving the test to read with
Net
Brake
™
The Workshop Pro is capable of saving test information in a format that will enable
the AutoTest
Net
Brake
™
software suite to generate reports for tests.
Before using this feature you need to have:
•
USB-A to Micro-USB cable
•
A completed test on your Workshop Pro that you intend to retrieve
•
AutoTest
Net
Brake
™
software installed on a computer.
To save all Tests:
1. Navigate to the Database page where you will see all the tests that have been
conducted on the Workshop Pro.
2. Select the save icon in the top right hand corner of the page
To save a single Test:
1. Navigate to the test report (via Database) you want to import into
Net
Brake
™
2. Select the
report icon
from the top right of the test report window.
3. Select the
‘Save test for PC’
from the displayed prompt.
