Auto
Stop
Mini Plus User Manual v2.014
Page 6
1. Average Deceleration (SRV36)
2. Maximum Deceleration
3. Test Duration
4. Pass/Fail Outcome
The pass/fail outcome of the test will be determined based on the type of the vehicle
selected and the measured value of the average deceleration (SRV36). If the measured
average deceleration (SRV36) is below the limit value, the test outcome will be ‘Fail’
(INSUFFISANTE)
. Otherwise, the test outcome will be ‘Pass’ (OK) when the measured
SRV36 value is above or equal to the limit value.
3.5 Test Instructions Summary
Screen Display
Instruction
Keys to Press
Blank Screen
Switch On
ON/OFF
Initial splash screen
Press any key to skip
Test?
Start to run test
ENTER
Examiner?
Enter Examiner ID if it is not
stored previously
Press
key and
key-in ID
and press ENTER
Customer:
Enter customer name
Key-in customer name and
press ENTER
Reg No:
Enter the Registration no
Key-in registration no and
press ENTER
Test with GPS?
Conduct test with GPS
Press ENTER for YES and
any other key for NO
Press any key to
commence the test
Press any key to commence
the test
Press any key to commence
the test
Ready to go…
Accelerate the vehicle
Prelude…
Forward direction detected.
Keep accelerating to
desired speed, then brake
Sampling…
Wait for result
Calculating…
Wait for result
Avg Decel (SRV36), Max
Decel, duration, pass/fail
Displays the test results of
brake test
Press ENTER
Save?
To save test result
Press ENTER to save or
→
to go to next item
Print?
To print test result on
remote Bluetooth printer
Press ENTER to print or
→
to go to next item
Print Another?
To print duplicate test result
Press ENTER if you want to
print the test result or press
→
Repeat Test?
To repeat same test
Press ENTER to repeat the
test or
→
to go to main
menu.
Must:
– Fix Mini Plus securely
– Install in a stationary vehicle
– Must drive in a straight line
Summary of Contents for AutoStop Mini Plus
Page 1: ...User Manual Version 2 014 AutoStop Mini Plus ...
Page 34: ...NOTES ...
