background image

RF-502

 

 

4

 

D.   

VALET/OVERRIDE SWITCH 

 

NOTE

: Both VALET and OVERRIDE functions are performed from the 

same switch. 
 

1.  OVERRIDE FUNCTION 

 
The OVERRIDE FUNCTION may be used if the RF-502 remote is lost or 
inoperative.  To operate the OVERRIDE FUNCTION, enter the vehicle 
(siren will sound); switch the vehicle ignition to ON.  Move the 
VALET/OVERRIDE switch to ON; then OFF; the siren will stop.  The RF-
502 will be disarmed.  Quickly replace or service the remote transmitter 
to insure continued vehicle protection. 
 

2.  VALET FUNCTION 

 
The RF-502 may be placed into the VALET (stand-by) mode to allow for 
vehicle service, car washing, or attendant parking without self arming 
after the ignition is switched off, and without leaving the RF-502 remote 
control with unauthorized individuals. 
 
To operate the VALET FUNCTION turn the vehicle ignition to on and 
move the VALET/OVERRIDE SWITCH to ON. 
 
To return to normal operation turn the vehicle ignition to on and move the 
VALET/OVERRIDE SWITCH to OFF. 
 

3.  KEYLESS ENTRY MODE 

 
In the valet mode, the vehicle doors can be locked and unlocked using 
the remote.  However, there will be no chirp confirmation; it is strongly 
recommended that the driver visually confirm that the doors are locked. 
 

 
 
 

Summary of Contents for RF-502



















Reviews: