background image

RF-502 

 

11

 

sensors, the SIS-10 has a LED and potentiometer for easy sensitivity 
adjustment. 
 

MSEN-KIT 

 
The MSEN-KIT includes two pre-wired Micro Resonance Sensors and a 
special triggering amplifier.  These special sensors are designed to be 
mounted within the vehicle door or on the door post near the latching 
mechanism that keeps the door closed.  When properly adjusted, they 
will respond to the frequency caused by metal-to-m etal contact, such as 
a lock pick, screwdriver, or professional door opening tools inserted into 
the door for attempted illegal entry into the vehicle.  the MSEN-KIT 
sensors are designed to provide limited coverage to specific areas.  
They should be used in conjunction with other AutoPage sensors for 
maximum protection capabilities. 
 

AC68 Power Window Module 
 

The AC68 Power Window Control Module will control the up or down 
motion of two power windows, or one power window and a power 
sunroof. 

 
RK-1 Relay Kit 

 
A pre-wired relay and socket for starter interrupt and other functions of 
the RF-502. 
 

ES6 

 
As an option to the standard single tone siren package, a six tone siren 
is available at additional cost. 
 

XT-54 EXTRA REMOTE CONTROL TRANSMITTER 

 
Additional/Replacement remote control transmitter. 

 
 

Summary of Contents for RF-502



















Reviews: