8
exit the “Power Save Mode”.
3. Clear the Flash Icon and Melody Sound:
Pressing the
button 3 times
within 3 seconds will clear the flash icon and the melody sound on the LCD screen
transmitter.
4. Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen
will alert the user through a melody sound and a flashing trigger icon. Press any
button o n the LCD remote transmitter to stop melody sound
only.
5. Button Lock:
This is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the
button firs t, within 3 seconds press and hold
(
)
button for 2 seconds to
activate
or
cancel
the button
lock function, the
icon will displayed on the LCD screen to
show the LCD remote transmitter is on “Button Lock”
6. Vibration / Melody Mode:
This is useful when you are in a noisy place and it is difficult to
hear the beep sound from the remote control. In this mode,
the remote control vibrates itself if your security system is
triggered.
Press the
button first, within 3 seconds press and hold
(
)
button for 2 seconds to select the mode of vibration
or melody, the
icon will displayed on the LCD screen to
show the LCD remote transmitter is on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen transmitter
If you want mute the “bi” sound mute always while press button. Press the
button first, within 3 seconds press and hold the
(Bi)
button for 2 seconds to
disable the “bi” sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing the button of the LCD screen transmitter.
9. Set Up Fixed Count Down Timer:
1. Press the
button first, within 3 seconds press and hold the
(
)
button
for 2 seconds, the LCD screen will show the
icon and timer (i.e. 0:10),
