background image

                                                                                  

 

15

releasing the Valet Switch. 

5.  Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 3 flashes 

from  the parking lights will indicate the system has disarmed. 

Note 1: You must override the alarm within 60 seconds. If not, the system will 
automatically re -arm. 

EXAMPLE: To Override The System With The Password Code 83, 

1. Enter the vehicle and turn the ignition switch to the 'ON’ position.   
(Alarm will sound.) 
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the 
system's siren will stop alarming, lights stop flashing, but the vehicle can not be 
s tarted or driven away.) 
3. Within 15 seconds of entering the last digit code enter (the 1

st

 code), turn the Ignition 

Switch “Off” and then “ON”. 
4. Within 15 seconds, Press and Release the Valet Switch 3 times. 

5. 

Turn the Ignition Switch to the “Off” position. 4 Ch irps form siren/horn and 3 flashes 

from the parking lights will indicate the system has disarmed.

 

 
K. VALET MODE:

 (System in Disarm or Valet mode) 

The valet switch allows you to temporarily bypass all alarm function, eliminating the 
need to hand your trans mitter to parking attendants or garage mechanics. When the 
system is in valet mode, all alarm functions and remote start functions are bypassed, 
however, the remote panic feature and remote door locks will remain operational. To 
use the valet mode, the sys tem must first be disarmed either by using your remote 
transmitter, or by operating the Manual Override sequence.

   

Enter Valet Mode: 

1.  From the disarmed condition, turn 

the ignition to the “ON” position. 

2. Push and hold the valet switch for 2 

seconds until the LED turns on. The 
LED will remain “on” as long as the 
system is in 'valet mode'.

 

Remote Door Lock

 

 

 

Remote Door Unlock

    

 

Exit Valet Mode: 

1.Return to normal operation, turn ignition 'on'. 

2. 

Push and hold the valet switch for 2 seconds, The LED will turn off, indicating the 

system has exited the valet mode.

 

 

L. CAR LOCATOR 

 

Under the armed mode, press the 

 

button to 

activate the car locator function. The siren will chirp 
6 times. The parking lights will flash 12 times 
making it easier to locate your car.

 

 

 
 
 
 
M. PANIC FUNCTION:

 

 

The transmitter can be used as a remote panic switch to manually trigger the alarm 
in case of emergency.

   

Summary of Contents for C3-RS-727A LCD



























Reviews: