background image

16

9

  Use the side terminal feature on the clamp to connect battery side terminals. 

When testing dual post batteries always check the post to which the system 
is attached. 

 

HOOK UP

2

.

  Connect to only one 6-volt or 12-volt battery at a time.

Red = (+) Positive and Black = (-) 

Negative

Make sure the terminals are clean 

and the connection is sure then 

press 'Y' Enter. If the "Check 

Battery Connections" remains 

the connections are not secure. If 

you are sure of a solid connection 

replace the battery.

1. 

Turn on the AC switch. The LCD will indicate "XTC-

160OZR" if the unit is properly plugged into an AC outlet. 

For your safety, make sure the AC receptacle is properly 

grounded. 

Note:

 

The XTC-160OZR is equipped with a power cord. Never use an 

 

extension cord smaller than 12 gauge or longer than 50ft. Make 

 

sure the extension cord and receptacle are properly grounded.

Note:

  Due to gases and usual corrosion around the positive terminal 

 

it is important to connect the positive (+) red clamp first. Make 

 

sure the connection is certain. Then connect the negative (-) 

 

black clamp

.

3.

  If the XTC-160OZR displays one of the following messages check your 

connections.

Connect Black 

Clamp to Negative 

(-) Terminal

Connect Red 

Clamp to 

Positive (+) 

Terminal

REVERSED BATTERY 

CONNECTIONS!!

CHECK BATTERY 

CONNECTIONS 

‘Y’ TO CONTINUE

Adjust the rating using the  (+Up) 

and (-Down) keys. Press 'Y' to Enter 

and begin the test.

If OTHER brand was selected, the battery 

rating type is needed. Use the  (+Up) and 

(-Down) keys to move the cursor. Press 'Y' 

to select. Depending on the battery type the 

choices will vary.  The options are CCA, CA, 

MCA, and AH.

ENTER BATTERY

RATING: 600 CCA

USE +/- 

'Y' TO CONTINUE

 BATTERY RATING

>MCA

 CCA

 CA

TESTING BATTERY 

PLEASE WAIT... 

S#22010 T#290 

'N' TO STOP

#290 12V BATTERY 

GOOD BATTERY 

'Y' TO PRINT

TEST ONLY SEQUENCE cont.

The XTC-160OZR serial number 

and test number are displayed to 

help reference the test to the print 

out.

 BATT. CATEGORY?

>ECONOMY

 EXTREME

 PLATINUM

 BATTERY TYPE?

>STANDARD

 AGM

 'Y' TO SELECT

Use the (+Up) and (-Down) keys 

to move the cursor. This list will vary 

depending on the battery brand selected. 

Press 'Y' to select. 'N' will go back to brand 

screen.

Economy

Extreme

Platinum

Premium

Super Start

Commercial 

Lawn & Garden

Marine

Power Sport

Red

Yellow

Blue

Optima

Other

Marine

Power Sport

Starting

Commercial

Lawn & Garden

For some battery categories the battery 

type is needed. Use the (+Up) and (-Down) 

keys to move the cursor. Press 'Y' to 

select. Press 'N' to go back to the Battery 

Category screen. 

For marine batteries the battery function 

type is needed. Use the (+Up) and (-Down) 

keys to move the cursor. Press 'Y' to select. 

Press 'N' to  go back to the Battery Type 

screen.

 BATTERY TYPE?

>STD. STARTING

 STD. DEEP CYCLE

 AGM STARTING

Summary of Contents for XTC-160OZR













Reviews: