18
7
WHAT TO EXPECT
…from your XTC-160OZR Tester/Charger
The Test and Charge Sequence can indicate if a 6 or 12 Volt battery is 'Good'
or 'Bad'. If the XTC-160OZR indicates that the battery needs charging it will
automatically charge the battery and in some cases you will know the results
within 5 minutes. Except in the case of deeply discharged batteries, 30 minutes
will be sufficient to determine if the battery is ‘Good', or 'Bad'. There is no need to
spend needless charging time on a bad battery. During the charge sequence the
XTC-160OZR will indicate the maximum time remaining to bring the battery to a
full charge. The LCD screen makes it possible to view the XTC-160OZR testing
and charging status – fully unattended.
The LCD provides easy menu instructions and test results for close-up operation.
SETUP
Scroll Down to Setup, Select setup
by pressing 'Y'.
Select the temp in Fahrenheit or
Centigrade.
Choose between English and
Spanish Language.
Set the LED display
contrast. Settings are
from 1 to 10. Press 'Y'
when contrast is at an
acceptable level.
The tester/charger factory default settings are English, F (Temp). To
change the settings, setup menu's below.
>SET TEMPERATURE
SCALE: F.
USE +/-
'Y' TO SELECT
>SET LANGUAGE
ENGLISH
USE +/-
'Y' TO SELECT
CHARGE ONLY
REVIEW/PRINT
>SETUP
ABOUT
>SET CONTRAST
CONTRAST 1
USE +/-
'Y' TO SELECT
