22
3
CONGRATULATIONS!
You have purchased Auto Meter’s XTC-160OZR system
designed to load test a battery and automatically provide a fast charge
when needed. The system is fully automated with LCD readout for
menu instructions, test results, and LED lights for unattended distance
viewing. If you should have any questions about this equipment or the
procedures, please see the back cover for contact information.
XTC-160OZR
Tests ......................... 6 Volt and 12 Volt Battery Check and Load Test
Load Sequence ............................Automated 160 Amp resistive ribbon
Charge Sequence ......5 to 30 min. (larger discharged batteries longer)
CCA Range......................................................................... 100 – 1600
LCD .......................................... Backlit 1" x 2.5" 4 line x 16 characters
Cooling ...........................................................................5" Internal Fan
Battery Temperature Measurement ................................... Infrared (IR)
Temperature Probe Holder ...................... Mounts to Battery Enclosure
Leads ....................................Load Amp/Volt – 4 ft., 6 Gauge/18 Gauge
2 conductor Smart Clamp
Power Cord.....................................................................14 AWG 15 Ft.
Size ......................................................................... 11.5" x 11" x 9 1/4"
Weight .......................................................................................43.5 lbs
T#10 12V BATT.
BATT. OVERHEATED
'Y' TO CONTINUE
T#10 12V BATT.
ERROR:ABORTED!
'Y' TO CONTINUE
The battery overheated during the
charge. Let the battery cool and try
recharging.
The charge stopped due to a hardware
issue with the XTC-160. Check the
clamps and AC power. Cycle the power
on the XTC-160 and try a recharge. If
error occurs again, call 866-883-8378 for
technical assistance.
