Auto Meter BVA-230OZR, Operator'S Manual

Page: 6 / 12

6 19
5
OTHER MENU ITEMS
REVIEW TESTS
Press (Y Enter) to select
Review/Print.
The last test will be displayed.
Press (+Up) or (-Down) key to
select the desired test. Press
(N Esc.) to go to main menu.
Scroll Down to Review/Print
Scroll down to about.
Press Y to select.
REVIEW/PRINT
VOLT METER
SETUP
>ABOUT
ABOUT SCREEN
The about screen shows the
model number. Firmware
revision and the tester
serial number.
Press any key to go back to
the menu.
BVA-230OZR
VERSION 2.12
SER #: 17533
COPYRIGHT 2012
>REVIEW/PRINT
VOLT METER
SETUP
ABOUT
#44 12V ALTER.
VOLT REG PASSED
DIODE PASSED
OUTPUT PASSED
AUTO METER
BVA-230OZR
07/07/10 10:00AM
'Y' TO BEGIN
CONTROLS AND FUNCTIONS
LCD:
Displays menus and test results.
KEYS:
When each key is pressed, a beep sounds
to assure contact has been made.
On/Off Key:
This is the manual on/off key.
Y Enter
Key:
This key selects the next menu, the
cursor line item and answers ' yes' to a test
progression.
N Esc
Key: This key cancels a test or
progression. It also returns to the previous
menu.
+Up Key :
This key moves the cursor up in order to
select a menu line item and increments
certain displayed values.
-Down Arrow Key:
This key moves the cursor down in order
to select a menu line and decrements
certain displayed values.
Print Key :
Point the BVA-230OZR infrared print light
towards the IR Print Receiver and press
the print key. Continue to point the print
light towards the IR Print Receiver until
printing is completed. Test results will be
printed.
On Menu an Up or Down Arrow
means the are more options than are
displayed.
Infrared Print Light:
When the print button is pressed
infrared data will be transmitted to the
printer IR receiver if pointed in the
appropriate direction (up to 15 ft.).
USB Type Mini B - Used for tethering to
the POSI-160.
Mini B USB Infrared Print Light