background image

16

© 2012 Directed. All rights reserved.

Remote and System Operations

Passive Locking*

Park and exit the vehicle, after the doors are closed the Passive lock-
ing countdown begins. The led flashes quickly and upon reaching 20 
seconds horn honks. At 30 seconds the system activates itself.

Anytime before the system locks you can re-enter the vehicle or 

open the trunk to load or unload items and, after closing passive lock-
ing resumes.

To stay secure in case of accidental unlocking the system, if a 

door is not opened within 30 seconds the system reactivates itself and 
locks the doors. 

Auto Re-locking*

Auto re- locking ensures the vehicle stays locked if it is not entered after 
unlocking by remote control. After unlocking by remote, the system  
automatically re-locks  the doors (if programmed on) in 30 seconds. 
Open any point of entry to stop the re-lock until the next unlock by 
remote.

Onetime Bypass*

Turn

 the ignition On for one to three seconds and then Off. The horn 

honks once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive

 

lock-

ing operation for one cycle. It also bypasses the comfort closure out-
put. After the next  unlock, all operations return to normal.

* The optional horn honk feature must be installed for confirmation. 

Summary of Contents for 4104A

































Reviews: